1. Strictly abide by the various operating procedures of stranding machine to ensure safe production. 2. According to the lay length requirements specified by the process, install the corresponding pulleys and lay length gears according to the lay length table.

Extrusion machine is usually set as a unit, with many equipment components. The price is relatively high. Therefore, you must pay attention to the following points when purchasing an extruder:

(1) Daily maintenance is a regular routine work that does not take up equipment operating hours and is usually completed during startup. The focus is to clean the machine, lubricate the moving parts, tighten the threaded parts that are easy to loosen, check and adjust the motors, control instruments, various working parts and pipelines in time.

1. High-speed cantilever single twisterPreparation before starting (1) Check whether the semi-finished products, process documents, tooling, and equipment are complete and easy to use according to the production tasks.

Extruder, generally refers to a type of cable equipment used in the cable industry to extrude particles such as plastic . Extrusion production line also refers to extrusion machine and extrusion production line. It is a production line used in cables. So what are the differences between the two?

1. Scratch on the surface of the cable: If the eye mold is scratched, replace the eye mold in time. (1) Find out the problem in time due to scratches such as the thread guide wheel and the wire storage rack, and adjust it immediately to solve it